mot straight edge (BI-470)

 BI-470

Detail BI-470 MOT STRAIGHT EDGE

BI-470 MOT STRAIGHT EDGE

For measuring the irregulation of road surface both asphalt and concrete pavement

BI-471 Mot Straight
Alumunium profile, 3 meter length, with handle 1 Pc

BI-472 Metric Wedges
Variable measurement from 2.5 - 7.5 cm, machine cast alumunium 1 Pc

Dimension (l x w x h) : 244 x 50 x 50 cm

Gross Weight : 45 kg

benkleman beam (BI-450)

BI-450

for measuring the deflection of flexible pavement under the action of moving wheel loads.

BI-451 (fixed beam) 1 set

Alumunium profile frame, 3 points adjuster, with vibrator and dial holder. Alumunium strip arm, 1: 2 lever ratio

BI-455 (tire gauge) 1 pc

120 psi capacity

BI-455 (Surface Thermometer) 1 pc

Range 30 x 0.01 mm

core drilling test set (BI-400A)

Core Drilling Test Set BI-400A..

Penawaran Harga via email: kawanindoteknik@ gmail.com

BI-400A
Dimension ( l x w x h) : 97 x 57 x 150 cm
Gross Weight: 145 kg

For cutting core samples from asphalt, concrete and other material on the road, run ways and structures.
BI-401 Core Drilling Machine Cast alumunium frame, gasoline engine 7 HP, 4 cycle vertical drilling position: rubber caster, up to 4" dia. bit 1 Set
BI-406 Diamond Bit 4" inner dia. 1 Pc
BI-407 Sample Tong 4" dia. 1 Pc
BI-408 Breaking Strip Galvanized steel 1 Pc
BI-409 Spanner Steel 42 mm and 32 mm 2 Pcs
GE-748 Leather Gloves.

Penawaran Harga via email:cvbimasucilabteknik@gmail.com

marshall test set (BI-320)

SPECIFICATIONS: 

Dimension ( l x w x h) : 67 x 50 x 100 cm
Gross Weight : 200 kg

ASTM D-1559 AASHTO T-245
For determining the resistance to plastic flow of cylinder specimen of bituminous paving mixture loaded on the lateral surface by means of the marshall apparatus.
BI-321 Compression Machine Steel frame, electric, 220 V-AC, 1/ 2 HP, 1 Phase, speed: 2" per minute 1 Set
BI-322 Compaction Mold Machined steel, galvanized, 4" dia., 3" height, with collar and base plate 1 Set
BI-323 Stability Mold Cast alumunium, split type 4" i.d., 4" wide 1 Set
BI-324 Compaction Hammer Machined steel, galvanized, 10 lbs, hammer weight, 18" drop height 1 Set
BI-326 Compaction Pedestal Wooden base with steel platen 1 Pc
BI-327 Compaction Mold Holder Machined steel, quick clamping system 1 Set
BI-328 Extruder Steel frame, hydraulic system 1 Set
BI-329 Flow Meter Cast alumunium, clamping bolt, with dial indicator 30 x 0.01 mm 1 Set
GE-200 Water Bath Stainless steel, water heater 220 V-AC, thermostat 30-85oC 1 Set
GE-101.6 Proving Ring 6000 lbs capacity 1 Set

Also required, but not part of this set : 
GE-161 Digital Balance
GE-222 Butane Field Heater
GE-363 Mixing Bowl
GE-622 Dial Thermometer

Kami dari workshop langsung,harga terjangkau dan berkualitas

Penawaran Harga via Telp/email:cvbimasucilabteknik@gmail.com

centrifuge extractor test set (BI-300A)

centrifuge extractor test set (BI-300)

ASTM D-2172 AASHTO T-164 For determining bitument content in hot mixed paving mixture and pavement sample BI-305 Centrifuge Extractor Electric, 220 V-AC, variable speed DC motor up to 3600 rpm, alumunium housing, removable cover and bowl, 1500 gram capacity. 1 Set BI-303 Filter Paper Low ash filter paper 1 Box Also required, but not part of this set : BI-304 Solvent ( CCL4) GE-152 Triple Beam Balance GE-174 Drying Oven GE-363 Mixing Bowl GE-403 Graduated Cylinder GE-748 Leather Gloves

Ductility of Bituminous Material tes set (BI-250)

BI-250 DUCTILITY OF BITUMINOUS MATERIALS TEST SET, ASTM D-113 / AASHTO T-51
For determining ductility of formed asphalt/ cement or semi solid bitument by measuring distance of elongation before breaking point when two end of briquet are pulled a part at a specific speed and temperature.
Consist of : 
BI-251 Ductility Mold ( 1 set) 
form sample shape and hold end during test, made of brass, provided with base.
BI-253 Ductility Machine ( 1 set) 
Electric 220 V-AC, stainless steel bath, provided with temperature control.
pulling speed : 5 cm/ min; travel range : 150 cm.
Dimension : 244 x 80 x 80 cm
Weight : 150 kg

labolatory penetration tes set (BI-230A)

ASTM D-5 AASHTO T-49
For determining consistency of bituminous materials
BI-231 Penetrometer Cast alumunium frame, 4 1/ 2" dial indicator, 400 x 0.1 mm dial, single knob control, weight of needle and plunger: 50 gr 1 Set
BI-232 Penetration Needle Steel needle with brass shank, 1 mm dia.2 Pcs
BI-233 Transfer Dish Glass, 100 mm i.d approx. 1 Pc
GE-390 Thin box 55 mm i.d approx, alumunium sheet, seamless 2 Pcs

Dimension ( l x w x h) : 50 x 50 x 70 cm
Gross Weight: 20 kg

flash and fire point by cleveland open cup (BI-200A)

BI-200A
Dimension ( l x w x h) : 100 x 50 x 50 cm
Gross Weight : 20 kg
ASTM D-92 AASHTO T-48
For determining flash and fire point by cleveland open cup for petroleum product and other liquids, expect fuel oils and materials having an open flash point below 79 C ( 173 F) as determined by cleveland open cup tester
BI-201 Flash Cup Brass, insulation handle 1 Pc
BI-202A Cleveland Electric Electric, 220 V-AC, heating speed control 1 Set
GE-648 Thermometer ASTM     11 C, 6 to 400oC 1 Pc
Also required, but not part of this set : 
GE-363 Mixing Bowl

flash and fire point by cleveland open cup (BI-200)

GTM-920A ASTM D-92/AASHTO T-48	Consist of	Qty
GTM-920.1	Flash cup, brass, insulation handle	1 pcs
GTM-920.2	Cleveland electric	1 pcs
GTM-920.3	Burning pipe, brass pipe, insulation handle	1 pcs
GTM-920.4	Flash cup plate, steel plate	1 pcs
GTM-920.5	Suppport adjustable height metal, thermometer holder	1 pcs
GTM-920.6	Y-Connector brass, provided with gas hose	1 set
GE-230	Bunsen burner, heat resources	1 pcs
GE-48	Thermometer ASTM 11C, 6 to 400 deg C.	1 pcs

flash and fire point by cleveland open cup,asphalt testing equipment, alat uji sipil

saybolt viscosimeter (BI-150a)

Saybolt Viscosimeter BI-150A..

Penawaran Harga via email: cvbimasucilabteknik@gmail.com

BI-150A
Dimension ( l x w x h) : 70 x 70 x 70 cm
Gross Weight: 25 kg

ASTM D-88 AASHTO T-72
For determining saybolt viscosity of petroleum products at specified temperature between 21.1 and 98.8 C.
BI-151 Viscosimeter Stainless steel bath, motor stirer, 220 V-AC, Thermostat control panel, 2 tubes capacity 1 Set
BI-154 Viscosimeter Tube Brass, seamless, provided with tips and tip wrench 2 Pcs
BI-155 Tube Wrench T-wrench 1 Pc
BI-156 Pipet Brass with rubber bulb 1 Pc
BI-157 Thermometer Support Alumunium plate 2 Pcs
BI-158 Flask 60 ml capacity 2 Pcs
BI-159 Funnel Brass, 60oangle, complete with mesh 100 / mesh 200 1 Pc
GE-644.1 Thermometer ASTM 17 C, 19 to 27oC 2 Pcs
GE-644.2 Thermometer ASTM 18 C, 34 to 42oC 2 Pc
GE-644.3 Thermometer ASTM 19 C, 49 to 57oC 2 Pcs
GE-644.4 Thermometer ASTM 20 C, 57 to 65oC 2 Pc
GE-644.5 Thermometer ASTM 21 C, 79 to 87oC 2 Pcs
GE-644.6 Thermometer ASTM 22 C, 95 to 103oC 2 Pc

Also required, but not part of this set : 
GE-700 Stop Watch

calibration anvil (co-555)

1.  for periodic calibration of concrete test hammer CO-550,complete with hammer guide
2. TESTING EQUIPMENT

          - SOIL

          - AGGREGATE
          - CEMENT
          - ASPHALT
          - CONCRETE
          - GENERAL
          - MINING

concrete test hammer (co-550)

Concrete Test Hammer CO-550

Penawaran Harga via email: kawanindoteknik@ gmail.com

CO-550
Dimension ( l x w x h) : 15 x 15 x 40 cm
Gross Weight : 2 kg

ASTM C-805
For rapid quality control of concrete works, with built in pointer scale and graph for various angle.

Penawaran Harga via email:bimasucilabteknik@gmail.com

vibrating table (co-410)

Konstruksi baja 50 x 50 cm meja kotak kontrol terpisah, variabel kecepatan hingga 3.600 rpm. Untuk compacting agregat dalam wadah baja atau sampel beton dalam kubus / cetakan silinder.

- Dimensi ( l x w x h) : 
55 x 55 x 85 cm

- Berat : 
70 kg

Air content of fresh mixed concrete (co-400)

CO-400
Dimension ( l x w x h) : 40 x 40 x 100 cm
Gross Weight : 20 kg

ASTM C-231 AASHTO T-152
For determining the air content of freshly mixed concrete from observation of the change in volume of concrete with a change in pressure.
CO-401 Air Entrainment Meter 5 ltr capacity, 3" maximum agregate size, direct reading 0-10% , manometer, hand pump 1 Pc
CO-402 Carryng Case Wooden box 1 Pc
GE-801 Scoop Cast alumunium 1 Pc
GE-871 Trowel Pointed type 1 Pc
GE-891 Straight Edge 40 cm length 1 Pc
GE-900 Rubber Mallet Rubber head, wooden handle 1 Pc
GE-920 Brush Steel wire 1 Pc.
GE-930 Tamping Rod Machine steel, galvanized 16 mm dia., 600 mm length 1 Pc

vebe time (co-380)

BS-1881 This method mechanised variation of the slump test and includes a determinaton of the workability of concrete
CO-381	Vibro Consistometer	Electric, 220 V, 50 Hz, 1 Phase, 200 Watt	1 Set
GE-700	Stop Watch	60 sec.sweep x 30 min	1 Pc
GE-801	Scoop	Cast alumunium	1 Pc
GE-930	Tamping Rod	Machine steel, galvanized 16 mm dia., 600 mm length	1 Pc

Slump Test Set (CO-370)

Slump Test Set CO-370

Penawaran Harga via email: kawanindoteknik@ gmail.com
Tlp. 0251-7544460
Hp. 081280832528

CO-370
Dimension ( l x w x h) : 70 x 70 x 50 cm
Gross Weight : 30 kg.

ASTM C-143 AASHTO T-119
For determining slump/ workability of concrete both in the laboratory and in the field.
CO-371 Slump Cone Heavy gauge sheet steel, 4" top dia., 8" bottom dia., 12" height 1 Pc
CO-372 Inspection Scale Machine steel, 0-10 cm slump measurement, 1 cm increment 1 Pc.
CO-375 Base Plate Steel sheet, carryng handle, 600 x 600 x 5 mm 1 Pc
GE-801 Scoop Cast alumunium 1 Pc
GE-871 Trowel Pointed type 1 Pc
GE-920 Brush Steel wire 1 Pc
GE-930 Tamping Rod Machine steel, galvanized 16 mm dia., 600 mm length 1 Pc.

Slump Test Set (CO-370A)

For determining slump/workability of concrete both in the laboratory and in the field

Dimension (l x w x h)

: 50 x 50 x 80 cm

Gross Weight

compacting factor apparatus (co-355)

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of COMPACTION FACTOR APPARATUS

The apparatus is used for determining the workability of fresh concrete, provided the maximum size of the aggregate does not exceed 38mm. The test is particularly useful for concrete mixes of very low workability where true slump values are not reliable.

Salient Features 

It consists of two rigid conical hoppers and a cylinder mounted on a rigid metal frame.The lower openings of the hoppers are fitted with hinged trap-doors having quick release catches.A circular metal plate is provided to cover the top of the cylinder.Supplied complete with one plaster's trowel and one tamping rod, 16mm dia x 600mm long, one end rounded

hydraulic concrete beam testing machine (co-330)

Detail HYDRAULIC CONCRETE BEAM TESTING MACHINE (CO-330)

CO-330 HYDRAULIC CONCRETE BEAM TESTING MACHINE; ASTM C-78

For determining the flexural strength of comcrete beam by using

a simple beam with third point loading.

Welded steel construction.

100 kN capacity, hydraulic hand pump, manometer reading.

Sample size (l x w x h) : 15 x 15 x 60 cm

Dimension (l x w x h) : 100 x 50 x 100 cm

Gross Weight : 110 kg

CO-351 MECAHNICAL CONCRETE BEAM TESTING MACHINE; ASTM C-78

For determining the flexural strength of comcrete beam by using

a simple beam with third point loading.

Welded steel construction.

50 kN capacity, Mechanical jack, proving ring reading.

Sample size (l x w x h) : 15 x 15 x 60 cm

Dimension (l x w x h) : 100 x 40 x 100 cm

Gross Weight : 110 kg