mot straight edge (BI-470)

 BI-470

Detail BI-470 MOT STRAIGHT EDGE

BI-470 MOT STRAIGHT EDGE

For measuring the irregulation of road surface both asphalt and concrete pavement

BI-471 Mot Straight
Alumunium profile, 3 meter length, with handle 1 Pc

BI-472 Metric Wedges
Variable measurement from 2.5 - 7.5 cm, machine cast alumunium 1 Pc

Dimension (l x w x h) : 244 x 50 x 50 cm

Gross Weight : 45 kg

benkleman beam (BI-450)

BI-450

for measuring the deflection of flexible pavement under the action of moving wheel loads.

BI-451 (fixed beam) 1 set

Alumunium profile frame, 3 points adjuster, with vibrator and dial holder. Alumunium strip arm, 1: 2 lever ratio

BI-455 (tire gauge) 1 pc

120 psi capacity

BI-455 (Surface Thermometer) 1 pc

Range 30 x 0.01 mm

core drilling test set (BI-400A)

Core Drilling Test Set BI-400A..

Penawaran Harga via email: kawanindoteknik@ gmail.com

BI-400A
Dimension ( l x w x h) : 97 x 57 x 150 cm
Gross Weight: 145 kg

For cutting core samples from asphalt, concrete and other material on the road, run ways and structures.
BI-401 Core Drilling Machine Cast alumunium frame, gasoline engine 7 HP, 4 cycle vertical drilling position: rubber caster, up to 4" dia. bit 1 Set
BI-406 Diamond Bit 4" inner dia. 1 Pc
BI-407 Sample Tong 4" dia. 1 Pc
BI-408 Breaking Strip Galvanized steel 1 Pc
BI-409 Spanner Steel 42 mm and 32 mm 2 Pcs
GE-748 Leather Gloves.

Penawaran Harga via email:cvbimasucilabteknik@gmail.com

marshall test set (BI-320)

SPECIFICATIONS: 

Dimension ( l x w x h) : 67 x 50 x 100 cm
Gross Weight : 200 kg

ASTM D-1559 AASHTO T-245
For determining the resistance to plastic flow of cylinder specimen of bituminous paving mixture loaded on the lateral surface by means of the marshall apparatus.
BI-321 Compression Machine Steel frame, electric, 220 V-AC, 1/ 2 HP, 1 Phase, speed: 2" per minute 1 Set
BI-322 Compaction Mold Machined steel, galvanized, 4" dia., 3" height, with collar and base plate 1 Set
BI-323 Stability Mold Cast alumunium, split type 4" i.d., 4" wide 1 Set
BI-324 Compaction Hammer Machined steel, galvanized, 10 lbs, hammer weight, 18" drop height 1 Set
BI-326 Compaction Pedestal Wooden base with steel platen 1 Pc
BI-327 Compaction Mold Holder Machined steel, quick clamping system 1 Set
BI-328 Extruder Steel frame, hydraulic system 1 Set
BI-329 Flow Meter Cast alumunium, clamping bolt, with dial indicator 30 x 0.01 mm 1 Set
GE-200 Water Bath Stainless steel, water heater 220 V-AC, thermostat 30-85oC 1 Set
GE-101.6 Proving Ring 6000 lbs capacity 1 Set

Also required, but not part of this set : 
GE-161 Digital Balance
GE-222 Butane Field Heater
GE-363 Mixing Bowl
GE-622 Dial Thermometer

Kami dari workshop langsung,harga terjangkau dan berkualitas

Penawaran Harga via Telp/email:cvbimasucilabteknik@gmail.com

centrifuge extractor test set (BI-300A)

centrifuge extractor test set (BI-300)

ASTM D-2172 AASHTO T-164 For determining bitument content in hot mixed paving mixture and pavement sample BI-305 Centrifuge Extractor Electric, 220 V-AC, variable speed DC motor up to 3600 rpm, alumunium housing, removable cover and bowl, 1500 gram capacity. 1 Set BI-303 Filter Paper Low ash filter paper 1 Box Also required, but not part of this set : BI-304 Solvent ( CCL4) GE-152 Triple Beam Balance GE-174 Drying Oven GE-363 Mixing Bowl GE-403 Graduated Cylinder GE-748 Leather Gloves

Ductility of Bituminous Material tes set (BI-250)

BI-250 DUCTILITY OF BITUMINOUS MATERIALS TEST SET, ASTM D-113 / AASHTO T-51
For determining ductility of formed asphalt/ cement or semi solid bitument by measuring distance of elongation before breaking point when two end of briquet are pulled a part at a specific speed and temperature.
Consist of : 
BI-251 Ductility Mold ( 1 set) 
form sample shape and hold end during test, made of brass, provided with base.
BI-253 Ductility Machine ( 1 set) 
Electric 220 V-AC, stainless steel bath, provided with temperature control.
pulling speed : 5 cm/ min; travel range : 150 cm.
Dimension : 244 x 80 x 80 cm
Weight : 150 kg